fischer Anchor Rod FIS A

fischer anchor rod fis a

The FIS A is fischer's threaded anchor rod for use with its injection mortars. It is a system component: the rod and the mortar together make the fixing. The sizes below are the ones Avlock supplies.

See sizes and specs 83 sizes

  • One rod for many mortars, which keeps the range manageable and storage simple.
  • Variable anchorage depths let the fixing be matched to the load, which can lower installation and material costs.
  • Approved, together with the right fischer mortar, for cracked and non-cracked concrete, solid brick, perforated masonry and aerated concrete.
  • Diameters from M6 to M30 in different lengths and steel grades.
  • Covered by European Technical Assessments, including ETA-02/0024.

Supplied by Avlock International to industrial and projects customers, with local technical support.

Talk to an expert WhatsApp us

How the fixing works

The rod is set by hand into a drilled hole filled with injection mortar, turning it lightly until it reaches the bottom of the hole. fischer recommends cleaning the hole thoroughly for the maximum load capacity.

Read moreShow less

It suits pre-positioned and push-through installation, and works with almost every fischer injection mortar. The exception is the FIS HB special mortar.

Where it is used

  • Steelwork constructions
  • Staircases
  • Machines

Sizes and article numbers

Anchor rod FIS A: sizes and article numbers
SizeArticle no.ThreadLengthFinish
M8 x 9090274A2M890 mmStainless steel A2
M8 x 9090274M890 mmZinc plated, grade 5.8
M8 x 11090275A2M8110 mmStainless steel A2
M8 x 11090275M8110 mmZinc plated, grade 5.8
M8 x 110902758.8 ZPM8110 mmZinc plated, grade 8.8
M8 x 13090276M8130 mmZinc plated, grade 5.8
M8 x 130902768.8 ZPM8130 mmZinc plated, grade 8.8
M10 x 951095A2M1095 mmStainless steel A2
M10 x 11090278A2M10110 mmStainless steel A2
M10 x 11090278M10110 mmZinc plated, grade 5.8
M10 x 110902788.8 ZPM10110 mmZinc plated, grade 8.8
M10 x 13090279A2M10130 mmStainless steel A2
M10 x 13010130HDGM10130 mmHot-dip galvanised
M10 x 13090279M10130 mmZinc plated, grade 5.8
M10 x 130902798.8 ZPM10130 mmZinc plated, grade 8.8
M10 x 150101508.8 ZPM10150 mmZinc plated, grade 8.8
M10 x 16510165A2M10165 mmStainless steel A2
M10 x 16510165DHGM10165 mmHot-dip galvanised
M10 x 17044969M10170 mmZinc plated, grade 5.8
M10 x 19010190A2M10190 mmStainless steel A2
M10 x 19010190HDGM10190 mmHot-dip galvanised
M10 x 19010190M10190 mmZinc plated, grade 5.8
M10 x 190101908.8 ZPM10190 mmZinc plated, grade 8.8
M10 x 20090449M10200 mmStainless steel A2
M10 x 20090282M10200 mmZinc plated, grade 5.8
M12 x 10512105A2M12105 mmStainless steel A2
M12 x 11512115A2M12115 mmStainless steel A2
M12 x 12044971M12120 mmZinc plated, grade 5.8
M12 x 13012130HDGM12130 mmHot-dip galvanised
M12 x 14090283A2M12140 mmStainless steel A2
M12 x 14090283M12140 mmZinc plated, grade 5.8
M12 x 16090451M12160 mmStainless steel A2
M12 x 16090284HDGM12160 mmHot-dip galvanised
M12 x 16090284M12160 mmZinc plated, grade 5.8
M12 x 160902848.8 ZPM12160 mmZinc plated, grade 8.8
M12 x 16512165HDGM12165 mmHot-dip galvanised
M12 x 20012200A2M12200 mmStainless steel A2
M12 x 200122008.8 ZPM12200 mmZinc plated, grade 8.8
M12 x 21090453M12210 mmStainless steel A2
M12 x 21090286M12210 mmZinc plated, grade 5.8
M12 x 22012220A2M12220 mmStainless steel A2
M12 x 22012220HDGM12220 mmHot-dip galvanised
M12 x 22012220M12220 mmZinc plated, grade 5.8
M12 x 220122208.8ZPM12220 mmZinc plated, grade 8.8
M12 x 25012250M12250 mmZinc plated, grade 5.8
M12 x 26090287M12260 mmZinc plated, grade 5.8
M12 x 30012300M12300 mmZinc plated, grade 5.8
M16 x 16016160A2M16160 mmStainless steel A2
M16 x 16516165A2M16165 mmStainless steel A2
M16 x 16516165HDGM16165 mmHot-dip galvanised
M16 x 16516165M16165 mmZinc plated, grade 5.8
M16 x 17590288M16175 mmZinc plated, grade 5.8
M16 x 175902888.8 ZPM16175 mmZinc plated, grade 8.8
M16 x 19016190A2M16190 mmStainless steel A2
M16 x 19016190M16190 mmZinc plated, grade 5.8
M16 x 20016200HDGM16200 mmHot-dip galvanised
M16 x 20090289M16200 mmZinc plated, grade 5.8
M16 x 200902898.8 ZPM16200 mmZinc plated, grade 8.8
M16 x 22016220HDGM16220 mmHot-dip galvanised
M16 x 25090457M16250 mmStainless steel A2
M16 x 25090290M16250 mmZinc plated, grade 5.8
M16 x 250162508.8 ZPM16250 mmZinc plated, grade 8.8
M16 x 30090291M16300 mmZinc plated, grade 5.8
M20 x 20020200A2M20200 mmStainless steel A2
M20 x 22020220A2M20220 mmStainless steel A2
M20 x 22020220HDGM20220 mmHot-dip galvanised
M20 x 22020220M20220 mmZinc plated, grade 5.8
M20 x 24590292HDGM20245 mmHot-dip galvanised
M20 x 24590292M20245 mmZinc plated, grade 5.8
M20 x 245902928.8 ZPM20245 mmZinc plated, grade 8.8
M20 x 26020260A2M20260 mmStainless steel A2
M20 x 26020260HDGM20260 mmHot-dip galvanised
M20 x 26020260M20260 mmZinc plated, grade 5.8
M20 x 29090293M20290 mmZinc plated, grade 5.8
M20 x 30020300A2M20300 mmStainless steel A2
M20 x 30020300HDGM20300 mmHot-dip galvanised
M24 x 29090294A2M24290 mmStainless steel A2
M24 x 29090294M24290 mmZinc plated, grade 5.8
M24 x 30024300M24300 mmZinc plated, grade 5.8
M24 x 38090295M24380 mmZinc plated, grade 5.8
M24 x 600246008.8ZPM24600 mmZinc plated, grade 8.8
M30 x 34030340M30340 mmZinc plated, grade 5.8
M30 x 38030380M30380 mmZinc plated, grade 5.8

A size such as M10 x 130 is a 10 mm thread on a 130 mm rod. The finish is shown for each line: 5.8 and 8.8 are the steel grades of the zinc plated rods. Article numbers that end in a finish code, such as 10130HDG, are Avlock stock codes.

Pack sizes and trade quantities on request. Need a size or product that isn't listed? Ask us. fischer's full range is also on fischer's website. Not sure which size you need? Tell us the base material and the fixture thickness, and we will help you choose.

Ask about this product WhatsApp us

Suitable base materials

Approved for, with the matching fischer injection mortar

  • Cracked and non-cracked concrete
  • Solid brick masonry
  • Perforated masonry
  • Aerated concrete

For approval details and the loads each combination can take, see the fischer load table.

Installation and safety notes
  • The rod is a system component. Use it only with a fischer injection mortar, and follow that mortar's approval for your base material.
  • Clean the drill hole thoroughly for the maximum load capacity.
  • Choose the finish for the conditions: zinc plated rods are for dry interiors, stainless steel for outdoors and damp rooms without aggressive conditions.
  • Always check fischer's technical documents (ETAs and load data) for your base material before you specify or install.