fischer Injection Anchor Sleeves FIS H K

fischer injection anchor sleeves fis h k

The FIS H K is fischer's injection anchor sleeve. It is the system component for using fischer injection mortars in hollow and perforated masonry, together with an FIS A threaded rod or an FIS E internal-threaded anchor. The sizes below are the ones Avlock supplies.

See sizes and specs 5 sizes

  • The grid structure keeps mortar use low while giving a good form fit with the brick.
  • Centring wings align the rod and suit several rod diameters, which simplifies storage.
  • Barbs hold the sleeve in the hole, so overhead installation is trouble-free.
  • Can bridge non-load-bearing layers such as plaster or insulation.
  • Covered by European Technical Assessments, including ETA-15/0263.

Supplied by Avlock International to industrial and projects customers, with local technical support.

Talk to an expert WhatsApp us

How the fixing works

The sleeve is placed in the drilled hole and filled with injection mortar from the bottom. When the anchor rod is pushed in, the mortar is pressed through the grid structure of the sleeve and locks into the hollow brick, which carries the load into the wall.

Read moreShow less

Centring wings hold the rod in the middle of the sleeve and suit several rod diameters, and barbs hold the sleeve in the hole for overhead work. The sleeve can also bridge non-load-bearing layers. The mortars FIS V Plus, FIS V, FIS VL, FIS Green and FIS P Plus can be used, and the approval of the mortar must be followed.

Where it is used

  • Anchoring in perforated brick masonry with injection mortar

Sizes and article numbers

Injection anchor sleeves FIS H K: sizes and article numbers
SizeArticle no.DiameterLength
FIS H 12 x 85 K4190112 mm85 mm
FIS H 16 x 85 K4190216 mm85 mm
FIS H 16 x 130 K4190316 mm130 mm
FIS H 20 x 130 K4670320 mm130 mm
FIS H 20 x 200 K4670420 mm200 mm

In a size such as 12 x 85, the first number is the sleeve diameter in mm and the second is the length in mm.

Pack sizes and trade quantities on request. Need a size or product that isn't listed? Ask us. fischer's full range is also on fischer's website. Not sure which size you need? Tell us the base material and the fixture thickness, and we will help you choose.

Ask about this product WhatsApp us

Suitable base materials

Approved for

  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Hollow blocks made from concrete
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Solid brick

Also suitable for

  • Hollow pumice slabs
  • Slabs made of hollow brick and other perforated brick
  • Solid pumice and other solid building materials

For approval details and the loads each combination can take, see the fischer load table.

Installation and safety notes
  • Use the sleeve only with a fischer injection mortar and follow that mortar's approval for your base material.
  • Always check fischer's technical documents (ETAs and load data) before you specify or install.