fischer Concrete Screw UltraCut FBS II

fischer concrete screw ultracut fbs ii

The UltraCut FBS II is fischer's high-performance concrete screw. Its saw-tooth thread cuts into the concrete as it is driven in, so installation is fast. The sizes below are the ones Avlock supplies.

See sizes and specs 12 sizes

  • Up to three approved screw-in depths, so one screw suits different fixture thicknesses.
  • A special saw-tooth thread for fast cutting into the concrete.
  • Can be loosened twice, so the fixture can be shimmed or aligned.
  • Drill hole cleaning is not required for installation in ceilings or floors.
  • Hex head with pressed washer (US), the same with a Torx socket (US TX), or a countersunk head (SK).

Supplied by Avlock International to industrial and projects customers, with local technical support.

Talk to an expert WhatsApp us

How the fixing works

The screw is driven into a hole drilled in the concrete. The special saw-tooth thread cuts quickly into the concrete as it goes in.

Read moreShow less

It suits push-through installation. fischer's approval lets the screw be loosened twice so the fixture can be shimmed or aligned, and up to three screw-in depths can be used for different fixture thicknesses.

Where it is used

  • Guard rails
  • Consoles and base plates
  • Temporary anchoring of site equipment
  • Shuttering props
  • Formwork bracing
  • Reinforcement of bridges
  • Rehabilitation of old buildings and car parks

Sizes and article numbers

Concrete screw UltraCut FBS II: sizes and article numbers
SizeArticle no.DiameterLengthHeadFinish
FBS II 8 x 705368528 mm70 mmHex head with pressed washer and Torx socket (US TX)Zinc plated
FBS II 8 x 805368538 mm80 mmHex head with pressed washer and Torx socket (US TX)Zinc plated
FBS II 8 x 1105368568 mm110 mmHex head with pressed washer and Torx socket (US TX)Zinc plated
FBS II 10 x 7053685910 mm70 mmHex head with pressed washer (US)Zinc plated
FBS II 10 x 9053686110 mm90 mmHex head with pressed washer (US)Zinc plated
FBS II 10 x 10053686210 mm100 mmHex head with pressed washer (US)Zinc plated
FBS II 10 x 12053688810 mm120 mmCountersunk head (SK)Zinc plated
FBS II 10 x 12053686310 mm120 mmHex head with pressed washer (US)Zinc plated
FBS II 12 x 11053687112 mm110 mmHex head with pressed washer (US)Zinc plated
FBS II 12 x 15053687312 mm150 mmHex head with pressed washer (US)Zinc plated
FBS II 14 x 10053687614 mm100 mmHex head with pressed washer (US)Zinc plated
FBS II 14 x 12553687714 mm125 mmHex head with pressed washer (US)Zinc plated

A size such as 10 x 90 is a 10 mm screw, 90 mm long. US is the hex head with pressed washer, US TX adds a Torx socket, and SK is the countersunk head. All lines are zinc plated.

Pack sizes and trade quantities on request. Need a size or product that isn't listed? Ask us. fischer's full range is also on fischer's website. Not sure which size you need? Tell us the base material and the fixture thickness, and we will help you choose.

Ask about this product WhatsApp us

Suitable base materials

Approved for

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for

  • Concrete C12/15
  • Solid building materials
  • Masonry with a dense structure

For approval details and the loads each combination can take, see the fischer load table.

Installation and safety notes
  • Covered by a European Technical Assessment, ETA-15/0352.
  • Always check fischer's technical documents (ETAs and load data) for your base material before you specify or install.